Aqua Master P110 Pro EC-pH-Temp Combo Pen

 Aqua Master P110 Pro Combo Pen

The updated Combo Pen P110 Pro features modern and robust housing. The improved software now ensures quicker and more accurate measurement readings. The electrode can easily be replaced should it be worn or damaged.

• Single unit to measure pH and EC
• Large easy to read, digital display
• IP67 waterproof rated
• Fully calibrated
• Replaceable electrode

Using the Aqua Master P110 pH & EC Combo Pen is a breeze. Here’s how:

1. 1. Remove the protective cover.
2. With distilled water, gently clean the electrode and dry it off.
3. To start the meter, press the on/off button.
4. Insert the meter upright into the solution, up to the edge, and stir gently. Wait a few seconds for the correct value to appear.
5. To switch between Celsius and Fahrenheit, press the C/F button.
6. To switch between pH and EC, press the MODE button.
7. After use, it’s crucial to rinse the electrode with water and press the On/off button to turn off the meter. This ensures the pen’s longevity and accuracy.

Aqua Master Replacement Probe P110 Pro

Suitable for the Combo Pen P110 Pro.

To replace the electrode:

1. Unscrew the sealing ring properly in the lower part of the meter.
2. Remove the old/defective electrode by pulling it.
3. Carefully place the new electrode with the recess in the correct position so that the connectors properly connect and do not damage the electrode or meter.
4. Check that the rubber seal is placed correctly.
5. Tightly tighten the sealing ring.
6. Calibrate the meter as described in this manual.
7. The meter is now ready for use.